Completed Projects

To conduct the following study for the Anokyi Mainline Compressor Station (AMCS) Phase II EPCC Project of Meridian Logistic and Engineering (MLE) on behalf of Ghana National Gas Company:

• SIMOPS study;
• HAZOP study;
• SIL (LOPA) study;
• FERA; and
• QRA study.

To perform Engineering Design calculations for the repairs and rectification of 36 Electrical Category 1 Defects.

To produce Engineering Design calculations, Bill of Quantities, Specifications, Detailed Engineering Drawings for Defects located within Battery Limit of Stations and identify the gap between the design parameters against the operating requirements of the equipment / item / system.

The scope also includes conducting site survey, investigation and obtaining all historical as well as present operations data of the equipment / item / system.

To perform Feasibility studies and front-end engineering studies, Detailed design activities including preparation of procurement documentation (invitation to tender packages) and technical bid evaluations, provision of personnel to work within TAQA’s organization, and provision of any other work and Services incidental to the foregoing including ‘as building’ documentation, survey works, minor plant changes, etc.

• Call-Off Order No. 01 - Transition of TAQA documents from the previous templates to the new corporate branded templates.

To provide Engineering Support for different ongoing Projects.

To perform engineering, detailed design including all analyses, procurement personnel support, preparation of operation and maintenance manuals, Commissioning and Start–up assistance to Company’s Operations Group as required and for the provision of all records / documentation necessary for the complete performance of the Work.

Also responsible for all aspects of the Services, with regard to Health, Safety, Security and Environmental (HSSE) performance, quality management, schedule, cost and functionality.

To conduct the following study for the Anokyi Mainline Compressor Station (AMCS) EPCC Project of Meridian Logistic and Engineering (MLE) on behalf of Ghana National Gas Company

• SIMOPS study;
• HAZOP study;
• LOPA study;
• SIL study; and
• QRA study.

Perform the First Commercial Production (FCP) and Offsite Facility Safe Operating Limit (SOL) latest revision through the following process:

• Perform SOL Needs Assessment and Identify SOL Gap Analysis;
• Establish SOL Mapping Exercise;
• Prioritization of SOL documents and Gap Closure;
• Creating and Updating of SOL Documents to the latest revision.

Detailed engineering and commissioning support for different well pads Tie-in.

To deliver the complete Process Safety Information (PSI) Needs Analysis Report including but not limited to:

• Process Safety Information (PSI) Needs Analysis Report;
• Presentation material outlining the salient point of the report;
• Native simulation files.

Supply and Delivery of the following:

• Multifunctional Electrical Meter
• Mass Flow Meter
• Universal Charging and Testing Unit FPU-1 (FPU-1-250-F-2.5-G3-A3-K)
• Thermal Imager (FLK-TIS75 9HZ, Thermal Imager, Manual Focus)
• Endress & Hauser Liquiphant FTL51
• Honeywell Analytics Handheld Interrogator ATEX Certified (4V0 software) for Optima, Optima Plus and Excel.

Reservoir, Source Water Plant 1 (SWP1) Expansion and Water Supply Pipeline (WSP).

To sustain the production of CPF1 and CPF2 in 2016, tie-in of new wells and existing well including the related facilities located in well pads by gathering crude oil and gas from the oil wells, transport through flow lines and/or trunk lines to CPF1/CPF2 is required.

Oil and Gas Gathering System, Pilot Test of Gas Lifting, Gas Lifting System, Water Injection System, Water Supply, Drain and Fire Fighting System, Power Supply System, Improvement to the Gas Turbine Power Plant, Instrumentation and Control System, Telecommunication System, Civil Works, Roads etc.

Appointed by CPECC BEB to provide engineering support for their office in Dubai and provide engineers in different disciplines to support:

• Algeria Projects Support.

• Process and Piping review of Water bath heaters and Slug catcher design. Scope involved review of P&ID’s, Datasheets and other design documentation to ensure the adequacy of the design and correctness of Material Take offs
• Engineering works for Slug Cather and Fuel gas skid. Preparation of Nozzle Orientation, Piping Isometrics, Piping Supports design, cable routing for Electrical and instrumentation inside the skids.
• Process review of Water bath heaters. P&ID’s, Datasheets and document review and verification of Water bath heaters and Material Take off review of the skids.

Halfaya Oil Field CPF3 Expansion 200k BOPD to 400k BOPD.

Carry out the PMC for PetroChina Halfaya CPF3 Iraq:

• Oil and Gas Train Units;
• Gas Compression Systems;
• Gathering Facilities (GRS); and
• Roads, Camps, others.
• Improvement to the Gas Turbine Power Plant
• Completion and Commissioning of Gas Lift Compression Plant.
• Provision of all site procedures, HSE, QA/QC, etc. and PMC Team for Project, Engineering & Construction Management of the Project Execution Phase.

Engineering Support for different ongoing Projects and Proposals for DNO, HUNT OIL, TAQA, GAS PLUS, CHEVRON, PETRONAS, Confidential and EXXON. This Scope includes installation supervisions, mechanical and piping testing, E/I testing and calbirations.

High Priority Surveys for Common Seawater Supply Project (SOC)

• Provided Project Management Services and related deliverables for High Priority Surveys which includes managing the subcontractors for Unexploded Ordnance (UXO) Survey, Topographical Survey, Geotechnical / Geophysical Survey, Bathymetric Survey, MetOcean Survey and Water Quality Sampling.
• To manage contractual matters between Petrolinvest and subcontractors.

Appointed by CPE to establish their Dubai office in accordance with Best International Practices.

Worked with CPE Management to provide Corporate Procedures – HSE, QA/QC, Procurement, etc. to obtain ISO qualification for the Dubai Office.

Provided Senior Engineer Teams for execution of Major Projects in Iraq:

• Different projects for Petronas-Iraq;
• Halfaya Works for PetroChina-Iraq.

PMC Service for Sinopec Ghana Gas Processing Plant:

• 2x150MMscfd Gas Processing Plant (GPP);
• Offshore Pipeline;
• 40MW Gas Turbine Power Plant;
• Roads, Camps, others.

ExidaSP has provided a team to the Detailed Engineering, Construction, Procurement and Commissioning phase 1 of the Project.

Halfaya Oil Field Phase 2 Expansion

100k BOPD to 200k BOPD

Carry out the PMC for PetroChina Halfaya Phase 2-Iraq:

• Oil and Gas Train Units;
• Gas Compression Systems;
• Lift Compression Systems
• 150MMscfd Gas Receiving Station (GRS);
• 3x10MW Gas Turbine Power Plant;
• Roads, Camps, others.

Provision of all site procedures, HSE, QA/QC, etc. and PMC Team for Project, Engineering & Construction Management of the Project Execution Phase.