Water Flood Injection Pump Replacement Concept Design
Conduct basic engineering, evaluate layout options, develop a concept-level E&I integration scheme, estimate costs for high-value and Long Lead Items, contact vendors for three options, and provide a Level 4 cost estimate and Level 2 management summary schedule.
Detail Design of Permanent Power Supply through Overhead Line (KPS2 to RETM) and Establishment of New Substation in RETM
Conduct OHTL engineering, covering but not limited to:
- Perform Site Visit and Route Survey Report;
- OHL Routing Layout;
- OHL Profile Section Drawing;
- OHL Design& Calculation Report;
- Datasheet for OHL& it's Material.
SIF Validation and Verification on Tilenga Project Upstream Facilities (TPUF)
Validating SIL Verification calculations for SIFs using exSILentia software with an optional scope of SIL Verification for SIFs using GRIF software, followed by validation using exSILentia or GRIF.
Payroll Services Agreement
The CONTRACTOR takes on the entire payroll process for the COMPANY, including payroll processing, tax administration, report generation, benefits management, insurance provision, leave tracking, and compliance support. This ensures efficient, accurate, and compliant payroll management for the COMPANY.
Human Factors Engineering Study
The Scope of Work includes, but not limited to:
- Human Factor for FEED phase of the Facilities described above, including non-licenced and licenced systems.
- Analysis, review, desktop activities, workshops and production of the corresponding studies and applicable reports.
- Execute this study in compliance with the relevant Client CoPs & Specification, HSE Guidelines and International Standards.
Provision of Third Party Technical Review for Paloch De-Bottlenecking (DBN) Facilities
Evaluate the Process Issues with the aim of de-bottlenecking the facility to achieve the original design intent. Conduct Site Visit and Sampling to inform de-bottlenecking recommendations. Adhere to DPOC Standards & Codes, South Sudan’s Rules, Regulations, and Laws, and International Standards and Best Practice
Flare and Relief Sizing Verification Services
Work to be provided comprise the following:
- Perform a detailed design verification of the Flare and Relief Systems for the West Qurna I (WQI) Oil Trains 2 and 3 located at Degassing Station 7 (DS7) and Degassing Station 6 (DS6);
- Lead the flare and relief sizing verification works;
- Integrated Engineering Management Team;
- Performing Sizing Calculations
- Review of Flare Net Model Network;
- Study for Acoustically Induced Vibration (AIV) for PSVs
- Flare radiation / dispersion Calculations Excluded for 3rd Party Scope
Detail Design Engineering of RETM-KRS2 Pipeline
The Services to be provided under the Contract may include, but not be limited to:
- Project management;
- Verification of the documents of the feasibility study dossier;
- Verification of available data;
- Identifying major gaps;
- Site visit/ verification;
- Site survey RETM & KRS2;
- Detailed engineering.
Call-Off Contract for the Provision of Engineering Consultancy Services
The Services to be provided under the Contract may include, but not be limited to:
- Feasibility studies and frontend engineering studies;
- Detailed design activities, including preparation of procurement documentation (invitation to tender packages) and technical bid evaluations;
- Provision of personnel to work within TAQA’s organization;
The provision of any other work and Services incidental to the foregoing including ‘as building’ documentation, survey works, minor plant changes, etc.
Project Management Site Services
Contractor shall provide the required personnel, and personnel management to support TAQA’s project activities as required.
Detailed Design Study for Sour Gas Incinerator with WHRU
Install a MODIFICATION that includes a Sour Gas Incinerator with associated Waste Heat Recovery Unit (WHRU). This will reduce the visible flare by burning the Gas in the Incinerator. The high temperature exhaust gas from the Incinerator will pass through a WHRU, which shall be integrated into a New Hot Oil System, which is used for on-site process heating requirements.
Provision of Engineering and Design Services
Concept, FEED and Detailed Engineering for Block 9 Field.
Provision of Engineering and Design Services
Concept, FEED and Detailed Engineering for Block 8 Field.
Technical Service for Engineering Projects in MEDC
Provide required Technical Service to support COMPANY for carrying out design engineering, detailed engineering, technical support for procurement activities such as; Material Requisitions (MRs), Technical Bids Evaluations (TBEs) & Vendor Data Requirements (VDRs), as well as support for the project management, planning, control, cost control, document control, construction and commissioning Work, as required.
Provision of Engineering Services (BAESHIQA)
Perform conceptual engineering (Identify, assess, select, define) options, preparation of conceptual reports, project controls, procurement support, detailed design including all analyses, preparation of operation, maintenance, commissioning, and start-up assistance to Company's Operations Group as required and for the provision of all records I documentation necessary for the complete performance of the Work. Responsible for all aspects of the Services, regarding Health, Safety, Security and Environmental (HSSE) performance, quality management, schedule, cost, and functionality.
Provision of Engineering for Pipeline River Crossing on Single Span Bridge Design
This pipeline traverses over the Khabour River via an underwater crossing, at which the original design was to bury the pipeline below the riverbed. During recent inspections, it was found that the pipeline was exposed at the Tawke side of the river crossing, and approximately 15 to 20mlengthofthepipelinewas found to be unsupported.
Provision of Engineering Consultancy Services
Pre-FEED, FEED, Detailed Design, Engineering and Support Services
The Services to be provided cover, but are not limited to, the following core activities:
Project Management;
Documentation Management;
Engineering Management;
Engineering Calculations and Simulations;
Equipment Design and Material Requisitions;
Preparation of Fabrication, Construction, Installation, and/or Commissioning Drawings;
Preparation of Specifications, Procedures and/or Philosophies;
Preparation of an integrated 2D and 3D models;
Preparation of As-Builts.
Provision Of Engineering Call-Off Services for Phases 1B, 1C and 1D
Provision of Engineering support on an ad-hoc Call Off basis in developing
the Shaikan Field in Northern Kurdistan.
Consultancy Services for Sarsang and Atrush Field Gas Processing Facility Study
Provision of Consultancy Services for Sarsang and Atrush Field Gas Processing Facility Study
Provision of Engineering and Design Services for the Block 11 Field Development Projects
General Engineering Services (Concept, FEED and Detailed Engineering) for Block 11 Field.
Framework Agreement for a Project Management Contract
A multi-year framework agreement for the performance of Project Management Contract "PMC" services for EPC Contracts.