Archives

Process and Piping review of Water bath heaters and Slug catcher design. Scope involved review of P&ID’s, Datasheets, and other design documentation to ensure the adequacy of the design and correctness of Material Take offs
Engineering works for Slug Cather and Fuel gas skid. Preparation of Nozzle Orientation, Piping Isometrics, Piping Supports design, cable routing for Electrical and instrumentation inside the skids.
Process review of Water bath heaters. P&ID’s, Datasheets and document review and verification of Water bath heaters and Material Take off review of the skids.

To conduct the following study for the Anokyi Mainline Compressor Station (AMCS) EPCC Project of Meridian Logistic and Engineering (MLE) on behalf of Ghana National Gas Company
SIMOPS study;
HAZOP study;
LOPA study;
SIL study; and
QRA study.

Safety Design Review – DNO North Iraq Topping Facility.

This pipeline traverses over the Khabour River via an underwater crossing, at which the original design was to bury the pipeline below the riverbed. During recent inspections, it was found that the pipeline was exposed at the Tawke side of the river crossing, and approximately 15 to 20m length of the pipeline was found to be unsupported.

To explore possible options and provide recommendation for the Peshkabir 2nd stage separator associated gas capture and enhance the gas handling compression and injection.